Table of Contents
Advertisement
Create a trapping preset
When you notice white edges between colour planes, you can add a trapping preset to your job.
Use the trapping editor on the control panel to create a trapping preset.
[177] Effect of use of a trapping preset
To use a trapping preset in an automated workflow, see
page
124.
To use a trapping preset in a job, see
[178] Colour adjustments
1. Touch [System]→[Colour adjustment]→[Edit trapping presets].
2. Select one of the available trapping presets.
3. Define the trapping settings:
• [Trap width] which controls the overlap for each trap.
• [Trap appearance] which controls the shape of the trap joins.
• [Images] options which control the trapping of images.
• [Trap thresholds] which are conditions to create a trap.
[179] Trapping preset editor
4. Click [Save as] to save the settings and enter a name for the preset.
5. Click [OK].
6. Check the print results.
Attributes of an automated workflow on
Change print quality settings for the job on page 163
Create a trapping preset
Chapter 7 - Document printing
175
Advertisement
Table of Contents
