Table of Contents
Advertisement
Media optimisation param‐
eters
[Enable printing on front
side], [Enable printing on
back side]
[Accept use for quality con-
trol sheets]
[Enable detection of nozzle
failures on front side], [En-
able detection of nozzle
failures on back side]
Description
These parameters indicate if the front and back sides of the media
are suitable for printing. In this way you can prevent that ink drops
come on one or two sides of the media.
NOTE
These parameters also determine if the media sides ac-
cept background spitting.
Most job media can be used for quality control sheets. Quality
control sheets are extra sheets that are printed during a job. The
printer uses quality control sheets for nozzle failure detection and
for nozzle cleaning. However, not all media are suitable for quality
control.
Disable this function when the media is coloured, preprinted, thin,
punched, or with tabs. Then, the printer will use alternative media
Learn about quality control sheets on page
instead. (
These parameters indicate if the front and back sides of the media
are suitable for nozzle failure detection sheets. When a media side
is not suitable, the printer does not apply nozzle failure detection
on this side. Then, the printer will restart the nozzle failure detec-
tion as soon as media that accepts nozzle failure detection on this
side enter the print engine. (
page
251)
NOTE
Be aware that these functions do not use use alternative
media to print nozzle failure detection sheets.
Learn about quality control sheets on
Chapter 8 - Manage media definitions
Optimise media
251)
193
Advertisement
Table of Contents
