Table of Contents
Advertisement
Create composite output profiles
When you select [None], device simulation is turned off and a normal output profile is
created.
3. Use the [Paper simulation] check box to enable paper colour simulation. When paper
colour simulation is enabled, the colour of the media on the simulated printer is
simulated. If paper simulation is enabled, the absolute colorimetric rendering intent is
applied, otherwise the relative colorimetric rendering intent is applied.
5. Click [OK].
The composite output profile, with a reference to the simulation profile, is in the list of output
profiles.
Create a composite output profile with a DeviceLink profile
1. Open the Settings Editor and go to: [Colour]→[Output profiles].
2. Click [Import].
3. Browse to the storage location of the DeviceLink profile (.icc file) of the simulated printer.
4. In the [Import device link] dialogue:
1. Define a name and description of the composite output profile.
2. Select the simulation profile.
5. Click [OK].
The DeviceLink profile, with a reference to its simulation profile, is listed in the list of output
profiles.
212
Chapter 9 - Manage colour definitions
Advertisement
Table of Contents
