Table of Contents
Advertisement
Learn about stacking behaviour
1. The stack tray of the first high capacity stacker collects the prints of the first job until the
maximum stack height has been reached.
2. The eject tray of the first high capacity stacker ejects the first stack of job 1.
3. The stack tray of the first high capacity stacker collects the remaining prints of the first job
and the first prints of the second job.
4. The stack tray of the second high capacity stacker collects the remaining prints of the second
job, because the linking of output trays is enabled.
Settings Editor
1. Define a stack height. (
ing in the high capacity stacker on page
NOTE
• Use the control panel of the high capacity stacker to manually eject a stack. (
the high capacity stacker on page
• You can define specific prints delivery settings also in the job properties, in an automated
workflows, and with transaction setups.
• It can be helpful to add separator sheets, banner pages or trailer pages to the jobs.
86
Chapter 5 - Job media handling
Define default stack-
68)
31)
Control panel
1. Specify in the workflow profile that a stack
eject occurs after each job and enable the
linking of output trays. (
profile on page
114)
Choose a workflow
Control panel of
Advertisement
Table of Contents
