Table of Contents
Advertisement
Attributes of an automated workflow
Finishing, print quality and colour attributes
[136] Automated workflow attributes (2)
Finishing attributes
[Output tray]
[Sheet order]
[Feed edge]
[Header orientation]
[Offset stacking]
[Offset after N sets]
Print quality attributes
[Resolution]
[Image smoothing]
[Moiré reduction for im-
ages]
[Trapping preset]
Colour attributes
[Colour preset]
[Colour bar], [Location],
[Alignment]
126
Chapter 7 - Document printing
Description
Select the tray of the prints.
Select the order of the prints in the output tray.
Select the orientation of the prints in the output tray.
Select the header orientation of the prints in the output tray.
Select if the stacking occurs with or without an offset.
Indicate if a group of sets is delivered with an offset. N means the
number of sets in a group.
Description
Select the print resolution.
Use this function when you want to apply an anti-aliasing algo-
rithm to smooth images with a low resolution.
Use this function when you want to apply a Moiré reduction algo-
rithm to enhance photographic images. Please note that when im-
ages have a resolution below 300 dpi, the Moiré reduction only
takes effect when the image smoothing function is enabled.
Select a trapping preset. (
Description
Select a colour preset. (
When you want to print a colour bar, select one of the available
Edit a colour bar on page
colour bars. (
You can also select the location and the alignment.
Create a trapping preset on page
Define a colour preset on page
203)
175)
205)
4
Advertisement
Table of Contents
