Table of Contents
Advertisement
Create a spot colour from the control panel
[237] Measure Lab value
3. Touch [Start].
4. Follow the wizard instructions how to measure the colour.
5. To evaluate the CMYK values, print a patch chart. (
page
227)
6. Touch [OK].
The spot colour is stored in the custom library.
Add CMYK values to a spot colour
1. Select the spot colour library and search the spot colour.
2. Touch [Edit].
3. Touch [Add] to add a CMYK value.
4. Select the media family.
The CMYK value for the media family is displayed.
[238] Edit a spot colour
222
Chapter 9 - Manage colour definitions
IMPORTANT
If ∆E is larger than 3, you are advised to measure the spot colour again.
Read the spot colour patch chart on
Advertisement
Table of Contents
