Replace The Tissue Cassettes - Oce VarioPrint i Series Operation Manual

Replace the tissue cassettes

Printheads are automatically cleaned with tissue ribbon according to a cleaning scheme. A roll of
tissue ribbon is enclosed in a cassette. For each ink colour and the ColorGrip liquid two cassettes
(labelled L and R) with ribbon are available. (
The dashboard indicates when you must prepare the replacement of a series of tissue cassettes.
One or two series of tissue ribbons are nearly used up. To know which series of tissue
cassettes are almost used up, touch the orange symbol in the dashboard to go the
[Supplies] pane. (
Only replace the cassettes when the action required screen appears.
One or two series of tissue ribbons are completely used up. An action required screen
with an instruction how to replace the cassettes appears.
Replace the used tissue ribbons soon after you replaced the tissue cassettes, so that you keep a
stock of cassettes with new tissue ribbons. (
[315] Location of the maintenance module
CAUTION
1. Wear nitrile gloves when you replace tissue cassettes. (
Before you begin
• You need to have the rights to access the maintenance tasks and the configuration settings.
• You need tissue cassettes with new tissue ribbons.
• You need a thick sheet of paper or cardboard.
Learn about printhead maintenance on page
Filling levels of supplies and waste on page
Replace a tissue ribbon on page
Replace the tissue cassettes
381)
303)
Notes for the reader on page
Chapter 12 - Maintain the printer
248)
16)
301