Create A New Template - Oce ColorWave 900 User Manual

Create a new template

Introduction
Create a new template in Océ Express WebTools.
NOTE
• Depending on the configuration, less or more settings are available.
• More or fewer settings will be shown depending on the selections made.
• Note that the templates on the user panel are ordered alphabetically. When you want to order
the templates to your preference, it is advised to use ascending numbers in front of the name
(01-02-03 etc.).
Procedure
1. Select the [Preferences] - [Fold] tab in Océ Express WebTools for the fold template.
2. Click on [Create new] at the right hand side.
3. Enter a [Name], recognisable for the user.
4. Enter a [Description], a description of the settings used.
5. Select a [Template source].
• Select [Custom template] when you want to define the fold settings yourself.
• Select [Template embedded in folding device] when you want to use a template that is
predefined in the folding device.
6. Select the desired settings. For every individual setting, there is a tooltip available in the template
editor to give a short explanation.
For more information on the settings for a [Custom template], see
templates on page
For more information on the settings for a [Template embedded in folding device], see
settings for embedded fold templates on page
7. Click [Ok] to save the template or [Cancel] to reject your entries.
118.
Fold settings for custom fold
121.
Chapter 5 - Configure the print system
Create a new template
Fold
117