Create A New Media Profile In Onyx - Oce Colorado 1640 Operation Manual

Create a new media profile in Onyx

Create a new media profile in Onyx
Introduction
When you are working with a new media that does not have a profile, you can create a new
profile in Onyx.
NOTE
This manual provides you with basic information in order to create and change media profiles.
Profiling is an expert task which requires additional information and tools not covered by this
manual. Contact your local support organization when you want to create or change media
profiles.
Procedure
1. Open the Onyx RIP queue.
2. Click on [Media Manager]. The Media Manager application opens.
3. Click on the Océ Colorado 1640 printer icon and click on [Media library] above.
28 Chapter 3 - Handle the media