Table of Contents
Advertisement
*WAI
VXIbus Access
Commands and
Queries
A16
Local Command Set 4-44
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
received, the self-test was successful.
488.2
Intent:
Prevent device from executing any further
commands until the No-Operation Pending flag is
TRUE.
Command
Syntax:
*WAI
Action: None.
The VXIbus access commands and queries are described on the
following pages.
•
A16
•
A16?
•
A24
•
A24?
•
SYSRESET
The A16 and A24 commands can be used to poke, or write,
locations in VXI A16 and A24 memory space. The A16? and
A24? queries can be used to peek, or read, locations in VXI A16
and A24 memory space.
If your application requires block moving or higher speed
accesses to or from the VXIbus address spaces, refer to
Appendix B, using the DMAmove and CDS-852 Adapter
Code Instruments.
The SYSRESET command can be used to remotely reset the
system.
Purpose:
Write a 16-bit value into VXI A16 space.
1260-00C User Manual
NOTE
Advertisement
Table of Contents
