Table of Contents
Advertisement
Setting the Reset
Operation
Setting the VXIbus
Requester Level
Setting the VXI
Operation 3-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The 1260-00C has three configurable reset parameters. They can
be enabled or disabled, and are as follows:
•
Pushbutton resets backplane (asserts SYSRESET* signal).
•
Pushbutton resets 1260-00C (asserts local reset signal).
•
Backplane SYSRESET* signal resets 1260-00C
(SYSRESET* on backplane asserts local reset).
The reset parameters can be altered by the non-volatile memory
configuration as described in Chapter 4, Change Configuration
Information.
To change the VXIbus requester level of the 1260-00C, move the
jumpers on jumper blocks W1 and W2 as shown in Figure 3-2.
The 1260-00C is configured at the factory to be a Level 3
requester.
Figure 3-2 VXIbus Requester Jumper Settings
As part of the hardware capabilities on the 1260-00C, there are
1260-00C User Manual
Advertisement
Table of Contents
