Wreg; Gpib Address Configuration Commands And Queries - Racal Instruments 1260-00C User Manual

WREG

GPIB Address
Configuration
Commands and
Queries
Local Command Set 4-32
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
<hex word value><CRLF>
Console response:
Value 0x<hex word value> (<word
value>) read from Logical Address
<logical address>, Register offset
0x<reg offset><CRLF>
Example: Read Device Type register from Logical Address
12.
RREG? 12,2
Purpose: Write a 16-bit VXI register on a particular device.
Query
Syntax:
WREG <logical address>, <reg offset>,
<value>
where <logical address> is the device to write,
<reg offset> is the register offset to write to,
and <value> is the 16-bit value to write.
Action: Write <value> to <logical address>, register
offset <reg offset>.
Example: Write the Data Low register for Logical Address 4
with the value 65535.
WREG 4,14,65535
The GPIB address configuration commands are described on the
following pages.
•
LaSaddr
•
LaSaddr?
•
Primary?
•
SaddrLa?
•
Saddrs?
•
SaDisCon
1260-00C User Manual