Ciaddr; Ciarea - Racal Instruments 1260-00C User Manual

CIAddr?

CIArea

Local Command Set 4-70
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Purpose: Get the local base RAM address of a CI.
Query
Syntax:
CIAddr? <logical address>
Response: Program response:
<base address><CRLF>
where <base address> is the CI's base
address in decimal.
Console response:
CI at Logical Address <logical
address> base Local Address is <hex
base address><CRLF>
where <hex base address> is the CI's base
address in C language hexadecimal notation.
Example: Get the local address of the CI at Logical Address
9.
CIAddr? 9
Purpose: Change the location and size of the CI RAM area.
Command
Syntax:
CIArea
blocks>
Action: Sets the CI global RAM to start at <Base
Address>, and span <Number of blocks>
blocks of 4096 bytes each.
The default base address and size of the CI RAM
area are set by the non-volatile configuration
parameters CI Block Base and CI Num
Blocks.
<Base Address> is the new base address of the
CI RAM area. It must be a multiple of 4096 decimal
(1000h), and must be in the region above the top of
pSOS Region 1 and below the top of memory.
pSOS Region 1 starts at 10000h, and its size is
determined by the non-volatile configuration
parameter Region 1 Size.
Region 1 Size = 60000h, the lowest allowed
1260-00C User Manual
<Base Address>, <Number of
For example, if