Table of Contents
Advertisement
Indications for Message-
Based Device Operation
Table 3-13, Front Panel LED Indications For Message-Based Device Operation
Sequence
FAILED
1
OFF
2
ON
3
ON
4
OFF
5
OFF
ON
OFF
Slot 0 Message-
Based Device
Configuration
Table 3-14, Slot 0 Message-Based Device Operation Switch and Jumper Settings
Operation 3-22
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
FAILED, TEST, and ON LINE LEDs. The LED indications are
shown in Table 3-13. A successful system start-up sequences
through the first five states. The point of failure is indicated for
states in which the FAILED LED is lit for an extended period of
time. The LED indications are identical for Non-Slot 0
Message-Based device and Slot 0 Message-Based device
operation.
TEST
ON LINE
OFF
OFF
OFF
OFF
ON
OFF
ON
ON
OFF
ON
OFF
ON
ON
OFF
To configure the 1260-00C for Slot 0 Message-Based operation,
use the following procedure:
a.
Enable the VXIbus Slot 0 functions.
b.
Set the model code of the 1260-00C to be configured for
Slot 0 operation using the non-volatile configuration mode.
c.
Set the logical address to a non-zero value with an
appropriate Servant area size. If the logical address is set
to FFh, the 1260-00C will participate in dynamic
configuration. Otherwise, the 1260-00C is a static
configuration device.
d.
Set the various switches, jumpers and non-volatile
configurations as shown in Table 3-14.
State
No power
In self-initialization
Failed before self-
test
In self-test
Failed in self-test
Waiting for BNO
Online
Failed
Failed while online
In non-volatile
configuration, or
diagnostics mode
1260-00C User Manual
Point of
Failure
Advertisement
Table of Contents
