Table of Contents
Advertisement
TrigCntrConf
Local Command Set 4-56
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Bit
1
2
All other values are reserved for future expansion.
Response:
Program response: 0
Console response:
Trigger assertion configuration (line
= <line text>, mode = <mode>)
complete.<CRLF>
where the meaning of <line text> corresponds
to the value of <line>:
Value of <line>
0 to 7
8 to 9
ffffh
Example 1: Configure all TTL/ECL trigger lines generally to
synchronize to the falling edge of CLK10 (as
opposed to the rising edge).
TrigAsstConf -1, 1
Example 2: Configure TTL trigger line 4 to synchronize to
CLK10 for any assertion method and do not
participate in SEMI-SYNC.
TrigAsstConf 4, 0
Purpose:
Configure the TIC chip internal 16-bit counter.
Query
Syntax:
TrigCntrConf <mode>, <source>, <count>
where <mode> specifies the configuration mode:
Value
0
2
3
<source> specifies the trigger line to configure as
1260-00C User Manual
General Configuration Modes
1 = Pass trigger through asynchronously
0 = Synchronize with next CLK10 edge
1=Participate in SEMI-SYNC with
external trigger acknowledge protocol
0 = Do not participate
Value of <line text>
TTL <line>
ECL (<line> - 8)
GENERAL CONFIG
Mode
Initialize the counter
Reload the counter leaving enabled
Disable/abort any count in progress
Advertisement
Table of Contents
