Table of Contents
Advertisement
Servant Area
GPIB Primary
GPIB Address
Assignment Method
GPIB Flags
GPIB Address to Avoid
Code Instrument Block
Base
Code Instrument Number
of RAM Blocks
Resident Code Instrument
Locations
Non-Volatile Configuration 5-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This parameter specifies what Servant area value to return to the
Resource Manager during a Word Serial Read Servant Area
query. This applies only when the 1260-00C is not Resource
Manager.
This parameter specifies the GPIB primary address of the
1260-00C to be used when in multiple secondary addressing
mode.
This parameter specifies what method to use to configure the
GPIB address of the 1260-00C. The choices are as follows:
a. Default:
0 for multiple secondary addressing
1 for multiple primary addressing
b. Always a particular GPIB address
c. No GPIB address
MultPrimary:
Multiple primary addressing mode is set.
MultSecond:
Multiple secondary addressing mode is set.
Others:
These flags are for information purposes only; do
not modify.
This is a 32-bit bit mask of GPIB addresses to avoid during
address assignment for either multiple primary or multiple
secondary addressing modes.
This parameter specifies the local 1260-00C address base for
Static Code Instruments.
This parameter specifies the number of 4-kilobyte RAM blocks
allocated from the block base for use by Static Code Instruments.
These parameters specify the base addresses of EPROMed Code
Instruments. These Code Instruments are automatically started
up after the Resource Manager operations complete.
1260-00C User Manual
Advertisement
Table of Contents
