VXI-Defined
Common ASCII
System
Commands
Local Command Set 4-26
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Action:
Commands device at <Commander's logical
address> to release ownership of the device at
<Servant's logical address>.
00C assumes ownership of the device.
Response:
Program response:
254<CRLF>
if the Commander released the Servant. Any other
response indicates that an error occurred.
Console response:
Logical Address <Commander's logical
address> released device at Logical
Address <Servant's logical address>.
Example:
Recover Servant at Logical Address 16 from
Commander at Logical Address 8.
Relsrvnt? 8,16
The VXI-defined Common ASCII System Commands and Queries
are described on the following pages.
•
DCON?
•
DINF?
•
DLAD?
•
DNUM?
•
DRES?
•
RREG?
•
WREG
These commands and queries are used to retrieve device
information/configuration, perform a soft reset, and peek/poke a
device's registers.
The DNUM? query is used to find out how many devices are in the
system. The DLAD? query returns a list of logical addresses for
devices in the system.
The DINF? query returns static information about a device. The
1260-00C User Manual
The 1260-