Table of Contents
Advertisement
1260-00C User Manual
Non-Volatile
Overview
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
NON-VOLATILE CONFIGURATION
This Chapter describes the method for editing and reviewing the
contents of the non-volatile memory used for storing configuration
information on the 1260-00C.
The 1260-00C non-volatile (NV) memory is a 256-byte EEPROM
accessible as 64 longword locations. The first half of the NV
memory (32 longwords) is reserved for use by Racal-Dana. The
second half of NV memory is allocated for storing Code Instrument
(CI) configuration variables.
The configuration parameters include the following:
•
Local register configuration
•
pSOS configuration
•
VXI interrupt line assignment
•
Resource Manager (RM) A24 and A32 address assignment
base
•
Servant area size
•
DC starting logical address and hierarchy configuration
•
Device failure mode
•
GPIB configuration
•
Default CI configuration
•
CI RAM area configuration
•
Resident CI locations
•
CI user configuration variables
The NV configuration mode can be entered through any of the
following methods.
a. Set the start-up mode switches to the non-volatile
configuration mode as described in Chapter 3 Start-up Mode
Configuration. Set switch S19 to the ON position, and set
switch S20 to the OFF position. Restart the system.
Chapter 5
Non-Volatile Configuration 5-1
Advertisement
Table of Contents
