Table of Contents
Advertisement
1260-00C User Manual
Code Instrument Non-
Volatile User
Configuration Variables
Change Configuration
Information
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
These parameters are completely user-defined, and can be used
for any purpose.
Change Configuration Information displays the 1260-00C
Non-Volatile Configuration Changer as shown in Figure 5-3.
1260-00C Non-Volatile Configuration Changer
=========================================
0). Edit Local Register Configuration
1). Edit pSOS Configuration
2). Edit VXI Interrupt Handler Logical Address
3). Edit Resource Manager A24/A32 Assign Bases
4). Edit Servant Area and DC Configuration
5). Edit FAILED Device Handling Mode
6). Edit GPIB Configuration
7). Edit Default CI Configuration
8). Edit Resident CI Base Locations
9). Edit CI User Configuration Variables
Q). Quit Editor
Choice (0-9,Q):
Figure 5-3. The 1260-00C Non-Volatile Configuration Changer
Edit the Racal-Dana-reserved configuration parameters and CI
user configuration variables by selecting the corresponding menu
item. In each case, you are prompted to enter constants for the
new values, with default values supplied where appropriate. For
the pSOS configuration parameters, the 1260-00C prints a formula
for calculating an appropriate value for each parameter when
typing in 0 in response to the prompt requesting the value.
The Default CI Configuration and Resident CI Base Locations
options are only important when installing a Resident CI. Refer to
Appendix B, Using The DMAmove and CDS-852 Adapter Code
Instruments, for instructions on installing the Resident CIs.
The
Change
Configuration
modifies only the RAM copy of the NV memory contents.
The NV memory must be updated with the Write Back
NOTE
Information
Non-Volatile Configuration 5-9
editor
Advertisement
Table of Contents
