Cilist - Racal Instruments 1260-00C User Manual

1260-00C User Manual
Bit
0 The 1260-00C was unable to delete the CI's GPIB address link.
1 The 1260-00C was unable to delete the CI's message exchange.
2 The 1260-00C was unable to delete the CI's Async process.
3 The 1260-00C was unable to delete the CI's Worker process.
4 The 1260-00C was unable to delete the CI's Word Serial I/O structures.
5 The 1260-00C was unable to free the PI CI's dynamic memory.

CIList?

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
indicates the result of the attempt to delete the CI.
If <error code> is equal to 0, the attempt was
successful.
Console response:
Code Instrument at Logical Address
<code instrument logical address>
successfully deleted<CRLF>
if the attempt was successful, or
Error Deleting Code Instrument (Error
code = <hex error code>)
if the attempt was unsuccessful.
<hex error code> is a value in C language
hexadecimal format that indicates the result of the
attempt to delete the CI.
<error code> and <hex error code> can be
interpreted by converting them to a binary bit
pattern. A value of 1 in any bit position indicates
the error shown in the following table occurred
during the attempt to delete the CI.
Error Condition
Any error encountered is unrecoverable because the
CI is not restored. Any further attempts to
communicate with it will have undetermined results,
and can adversely affect the behavior of the
1260-00C.
Purpose: Get a list of logical addresses for CIs running on the
1260-00C.
Local Command Set 4-73