Table of Contents
Advertisement
General
Configuration
Commands and
Queries
CONF
Local Command Set 4-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
<Command Syntax>
Example:
List syntax and descriptions of general configuration
and GPIB address commands.
Help?
gc,sa
The general configuration commands and queries are described
on the following pages.
•
CONF
•
ConsoleEna
•
ConsMode
•
DIAG
•
DPRAM?
•
NVconf?
•
OBRAM?
•
ProgMode
•
WordSerEna
The ConsMode and ProgMode commands enable and disable the
console and program response modes for the port originating the
command.
The ConsoleEna and WordSerEna commands control access to
the local command set from the RS-232 and VXI Word Serial
ports.
The NVconf? query returns the contents of the onboard non-
volatile memory. CONF reboots the 1260-00C and enters the non-
volatile configuration editor.
DIAG reboots the 1260-00C and enters diagnostic mode.
The OBRAM? query can be used to determine the amount of
1260-00C installed RAM, and the DPRAM? query returns the
amount of the installed RAM that is shared with VXI A24 space.
Purpose:
Reboot into non-volatile configuration mode.
Command
1260-00C User Manual
<Command description>
<CRLF>
Advertisement
Table of Contents
