Table of Contents
Advertisement
*OPC?
*RST
*SRE
Local Command Set 4-42
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Intent:
Cause the 1260-00C to generate the operation
complete message in the ESR when all pending
selected device operations have been finished.
Command
Syntax:
*OPC
Action: None.
Note that because the 1260-00C only parses and
routes commands, there are never any pending
commands on the 1260-00C
488.2
Intent:
Cause the 1260-00C to place an ASCII 1 in its
output queue when all pending operations have
completed.
Query
Syntax:
*OPC?
Response:
1 <CRLF>
488.2
Intent: Return a device to a known initial state.
Command
Syntax:
*RST
Action: None.
Other than the response mode configuration, the
1260-00C does not depart from its initial state.
488.2
Intent:
Set the device's Service Request Enable (SRE)
register bits.
Command
Syntax:
*SRE
<byte value>
where <byte value> is the new value of the SRE
register.
Action: Sets the SRE to <byte value>.
1260-00C User Manual
Advertisement
Table of Contents
