Table of Contents
Advertisement
1260-00C User Manual
VXI Interrupt
Handler
Configuration
Commands and
Queries
AllHandlers?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The interrupt handler configuration commands and queries are
described on the following pages.
•
AllHandlers?
•
AssgnHndlr
•
HandlerLine?
•
RdHandlers?
The interrupt handler commands and queries configure and report
the relationships between the 1260-00C interrupt handlers and
VXIbus interrupt levels.
The 1260-00C has three programmable interrupter handlers. An
application program can confirm this with the RdHandlers?
query. The AllHandlers? and Handerline? queries return
the current VXI interrupt level assignments for the handlers. The
AssgnHndlr command can be used to change the level
assignments.
Purpose:
Get the VXIbus interrupt level assigned to all
1260-00C interrupt handlers.
Query
Syntax:
AllHandlers?
Response:
Program response:
<level1>,<level2>,<level3>
where <level1> is the interrupt level assigned to
Handler 1, <level2> is the interrupt level
assigned to Handler 2, and <level3> is the
interrupt level assigned to Handler 3.
If <levelN> equals 0, Interrupt Handler
<handlerN> is not assigned to an interrupt level.
Console response:
VXI Interrupt Handler 1 assigned to
interrupt level<level1><CRLF>
VXI Interrupt Handler 2 assigned to
interrupt level<level2><CRLF>
VXI Interrupt Handler 3 assigned to
<CRLF>
Local Command Set 4-37
Advertisement
Table of Contents
