Table of Contents
Advertisement
Set Configuration to
Factory Settings
Write Back (Save)
Changes
Quit Configuration
Non-Volatile Configuration 5-10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
(Save) Changes command in the main menu to retain
the changes after the 1260-00C has been reset or
powered-down.
Select Quit Editor to return the display to the main menu.
Set Configuration To Factory Settings sets the
contents of the RAM copy of the NV memory to the default
(original) factory settings. Note that only the RAM copy is
affected. You must use the Write Back (Save) Changes
command in the main menu to write back the NV memory, and
retain the changes after the 1260-00C has been reset or
powered-down.
Write Back (Save) Changes writes the modified copy of the
NV memory back to the EEPROM. The write-back procedure
takes five to ten seconds.
Quit Configuration prompts selection of a different start-up
configuration, or re-enters pROBE depending upon how the non-
volatile configuration mode was entered.
1260-00C User Manual
Advertisement
Table of Contents
