Table of Contents
Advertisement
ECIboot?
Local Command Set 4-78
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Any GPIB address links to <Servant1>,
<Servant2> through <ServantN> must be
disconnected before the PI DCI is downloaded.
You can delete the links by using the SaDisCon or
LaSaddr commands.
Response: Program response:
0 <CRLF>
0 is returned to report the successful completion of
the DCISetupPI? command. Any errors are
reported in the form of an error code.
Console response:
PI DCI parameters OK, Ready to
download.<CRLF>
Example:
Set up to download a PI DCI at Logical Address
C0h, to be a Servant of the device at Logical
Address 2 and Commander of device at Logical
Address 50. Set up to download up to 10000 bytes
of code and data to a pSOS dynamic memory
segment, and allocate a 2048-word stack.
DCISetupPI?
Purpose:
Start up an EPROMed Code Instrument (static or
position independent) that already resides in
memory of the 1260-00C.
Query
Syntax:
ECIboot? <address>, <debug>
Response:
Program response:
none
Console response:
EPROMed Code Instrument at address
<address> booting complete.<CRLF>
where <address> is the local 1260-00C
memory-mapped address of the EPROMed Code
Instrument.
Example:
Boot EPROMed Code Instrument at address
1260-00C User Manual
#hC0,0,10000,#h800,50
Advertisement
Table of Contents
