Connection Of Mains Infeed Module (U/E, I/Rf) - Siemens SINUMERIK FM-NC Installation And Startup Manual

03.96
Note
For cables and connectors, see
References:
2.2.2 Connection of mains infeed module (OI, I/RF)
X111
X121
X141
X161
X171
X172
LED
displays
X181
Fig. 2-5 Interfaces for OI and I/RF module 10–55KW
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
/PHD/, Configuring Manual 840D
Electronics power
supply faulty
Device is not ready,
no enable signal
(term. 63, 64 or 48)
Mains fault
X351
Device bus
P600
DC link connection
M600
Power supply
U1 V1 W1 PE1
2 Configuration
2.2 Electrical configuration
LED displays
5V voltage
Red
Red
level faulty
Device ready
Yellow
Green (DC link
precharged)
Red
DC link over-
Red
voltage
2
2-25