03.96
11.7 Data backup with VALITEK streamer on the MMC101/102/103 (SW 5.3 and lower)
Your Choice [1,2,3,4,5,6,7]?
4. Press key 1
The following menu is displayed:
Your Choice [1,2,3]?
5. Select a streamer type, e.g. no. 2 Valitek PST
Your Choice [1,2,3,4,5,6,7]?
6. If the streamer is connected you can check the connection. To do this select
Press any key to continue ...
The test run then starts.
Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
PLEASE SELECT:
1 Select VALITEK Streamer Type
2 Test Connection to Streamer
3 Backup System
4 Backup User Data
5 Restore from Tape
6 Uninstall MMC102/103 (Delete Files)
7 Return to Main Menu
*** No Streamer configured ***
Please select (new) Streamer type:
1 Valitek PST–160
2 Valitek PST
3 Return to previous Menu
selected and you are taken back to the selection menu.
PLEASE SELECT:
1 Select VALITEK Streamer Type
2 Test Connection to Streamer
3 Backup System
4 Backup User Data
5 Restore from Tape
6 Uninstall MMC102/103 (Delete Files)
7 Return to Main Menu
menu item 2
A message about the streamer type is displayed:
*** Current Configuration: Valitek PST
2
–M1200
2
–M1200. The streamer type is
2
–M1200 ***
11 Data Backup
11-277
11