Siemens SINUMERIK FM-NC Installation And Startup Manual page 171

Hide thumbs Also See for SINUMERIK FM-NC:
Table of Contents

Advertisement

04.00
03.96
3. Zeiss measuring systems (e.g. LIE 5)
Note
The positive count direction of the Zeiss linear measuring system must be de-
termined in exactly the same way as that of the RGH22B Renishaw system
(see Fig. 6-37).
Temperature
This connection variant has proved to extremely interference-immune and
should always be employed.
sensor coupling
lead (= dongle)
If an incremental measuring system is used, the drive is roughly synchronized
using the rotor position identification routine.
–X411
SIMODRIVE
611 D
Drive A
U2 V2 W2 PE
Fig. 6-38
Temperature sensor coupling lead (recommended standard connection)
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
6 Assigning Parameters to the Control and the PLC Program
6.10 Linear motors (1FN1 and 1FN3 motors)
Encoder lead
6FX2001–2CG00–xxxx (incremental)
6FX2002–2CH00–xxxx (absolute)
Temperature sensor coupling lead (dongle)
6FX2002–1AA14–xxxx
Power cable
Linear scale
Primary part
6-171
6

Advertisement

Table of Contents
loading

Table of Contents