Siemens SINUMERIK FM-NC Installation And Startup Manual page 173

04.00
03.96
Temperature
The temperature sensors can be evaluated, for example, as follows:
sensor and
S
electrical wiring
(see
Section 6.10.5)
S
–X411
SIMODRIVE
611 D
Drive A
U2 V2 W2 PE
Power cable
1FN
Motor 1
Fig. 6-41 Wiring of parallel-connected linear motors
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
6 Assigning Parameters to the Control and the PLC Program
6.10 Linear motors (1FN1 and 1FN3 motors)
Temperature sensor
– Motor 1: Evaluation via the drive
– Motor 2: Not connected
(shorted-circuited or connected to PE)
Temperature switch or PTC
– Motors 1 and 2: External evaluation
Linear scale
Temperature sensor
coupling lead
Motor 2 1FN
External
evaluation
Power cable
6
6-173