Siemens SINUMERIK FM-NC Installation And Startup Manual page 267

12.98
03.96
Supplementary
conditions
1. A backup/restore at file level is performed on the MMC in the Services area,
2. Individual software components are installed/re-installed either via diskette
3. With MMC102/3 running BIOS Version 2.12 the error "Expection error (13)"
4. For a backup/restore via parallel port or network the power saving feature of
5. After completing the backup/restore with Ghost, the parallel cable should be
6. If the external PC is equipped with an AMD K6 processor, problems can
7. CD–ROM drive access problems can occur occasionally with certain pro-
Functions of
R
Norton Ghost
S
S
S
S
S
S
S
S
S
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
11.4 Back up hard disk via Norton GhostR (SW 4.4 and higher)
e.g. by selective backup of start-up or machine data, etc. (via diskette, V.24,
PC card).
or parallel interface (Interlnk/ InterSrv).
Problems associated with the BIOS update must be considered.
can occur after a successful restore".
Remedy: Switch the MMC102/103 off and on again.
the PC/PG must be deactivated.
removed again, in order to prevent unexpected MMC operating states.
arise with the parallel connection at processor clock speeds > 233 MHz. In
this case, operate both computers (MMC and PC) with LPT BIOS setting
"ECP".
gramming devices. This can lead to a shut-down of the Ghost connection
during the direct restore of an image file from CD–ROM.
Remedy: Copy the image file from the CD onto the hard disk of the program-
ming device.
Storage of complete hard disks in an image file
Restoration of hard disks from an image file
Compression of image files
Integrated link via LPT master/slave interface, e.g. from
MMC 103 with PG (without Interlnk/ Intersrv)
Support for different operating systems of the MMC102/103 with SW 3.x and
SW 4.x:
– Windows 3. x
– Windows 95
Support of long file names
Disk integrity and image file integrity check
Reloading of image files to unformatted hard disk ("formats on the fly")
New destination hard disk can be larger or smaller (provided it is sufficient
for data quantity) than the original
11 Data Backup
11-267
11