IDEC FT1A Series User Manual page 304

12: R I/O
EMOTE
Using Saved Remote I/O Slave Settings
Operation procedure
In the Remote I/O Slave Configuration dialog box, click Open.
1.
The Open dialog box is displayed.
Select the configuration file (*.frs) to use and click Open.
2.
The remote I/O slave settings are loaded.
Notes:
When the remote I/O slave settings are read, the existing settings in the dialog box are overwritten.
•
If you specify an invalid file, an error message is displayed and the remote I/O slave settings are not loaded.
•
12-14 S AXIS P /L U '
MART RO ITE SER S
M FT9Y-B1378
ANUAL