IDEC FT1A Series User Manual page 168

6: HMI F
UNCTION
List of Button Operations on the System Menu Screen
Stop
External Memory
Device Monitor
Program Monitor
Switch Press/Hold
Press
Press and hold
Press
Press and hold
Press
Press and hold
Press
Press and hold
Press
Press and hold
Press
Press and hold
List of Button Operations on the Ladder Monitor Screen
Ladder monitor screen
00001
I0000 SOTU
00002
M0000 M0001 M0002
Switch Press/Hold
Press
Press and hold
Press
Press and hold
Press
Press and hold
Press
Press and hold
Press
Press and hold
Press
Press and hold
6-4
Moves the cursor up one line. If the cursor is at the start of the item list, nothing happens.
Repeats the press operation.
Moves the cursor down one item. If the cursor is at the end of the item list, nothing happens.
Repeats the press operation.
Nothing happens.
Executes the function selected with the cursor (depending on the function, displays additional menus).
Nothing happens.
Returns to the previous screen (the calling screen).
While pressing the (ESC) button, press the
Moves the cursor up one line. When the cursor is on the top line of the rung, nothing happens.
Moves the cursor to the top line of one rung above. If the cursor is on the top rung, it moves the cursor to the
top line of that rung.
Moves the cursor down one line. When the cursor is on the last line of the ladder, nothing happens.
Moves the cursor to the top line of one rung below. If the cursor is on the bottom rung, it moves the cursor to
the top line of that rung.
Moves the cursor once to the left. When the cursor is at the left edge of the line, nothing happens.
Moves the cursor to the left edge. When the cursor is at the left edge of the line, nothing happens.
Moves the cursor once to the right. When the cursor is at the right edge of the line, nothing happens.
Moves the cursor to the right edge. When the cursor is at the right edge of the line, nothing happens.
If the instruction selected by the cursor is a NO contact or a NC contact, toggles the on/off state. If the
instruction selected by the cursor is not a NO contact or a NC contact, nothing happens.
Displays the parameter details for the instruction selected with the cursor.
Ends ladder monitor mode.
Not valid.
S AXIS P /L
MART RO
Basic operation
(OK) button to return to the top screen of the system menu.
Basic operation
U ' M FT9Y-B1378
ITE SER S ANUAL