IDEC FT1A Series User Manual page 351

Troubleshooting Diagram 3
SmartAXIS Lite - The Error Status LED (ERR) is On
•
The error status LED is on.
Clear error codes using WindLDR.
See Note below.
Did the error status LED turn off?
See "General Error Codes" on page 14-3.
Identify the error code and correct the error.
Did the error status LED turn off?
Call IDEC for assistance.
Note: Temporary errors can be cleared to restore normal operation by clearing error codes from WindLDR. See "Clearing Error Codes from
WindLDR" on page 14-2.
YES
NO
YES
NO
S AXIS P /L
MART RO ITE
U ' M FT9Y-B1378
SER S ANUAL
14: T
ROUBLESHOOTING
END
END
14-11