IDEC FT1A Series User Manual page 44

2: P S
RODUCT PECIFICATIONS
After removing the expansion communication port cover, carefully install a communication cartridge on the SmartAXIS expansion
communication port. Ensure that the cartridge is installed with the correct orientation.
Removal Procedure
As in the procedure to remove the expansion communication port cover, insert a flat head screwdriver into the slots, press in the
tabs at either end of the communication cartridge, and lift it directly upward. If the cartridge is removed in a crooked state, the
housing of the cartridge or the internal connector may be damaged.
•
Caution
•
2-24
Communication Cartridge
Turn off the power to the SmartAXIS before removing or installing a communication cartridge.
If a communication cartridge is installed while the SmartAXIS is powered, the SmartAXIS or the communication
cartridge may be damaged.
S AXIS P
MART RO
With communication
cartridges installed.
/L U ' M FT9Y-B1378
ITE SER S ANUAL