IDEC FT1A Series User Manual page 187

Downloading the User Program (Memory Cartridge to SmartAXIS)
You can download the user program in the memory cartridge to the SmartAXIS. This function cannot be used while the SmartAXIS
is running.
On the standard screen, press the
1.
Stopped
2012/OCT/10/WED
13:30:40
The system menu is displayed.
Select External Memory with the
2.
Run
Edit Program
External Memory
Configurations
Select Memory Cartridge with the
3.
Memory Cartridge
SD Card
Select Cartridge -> PLC with the
4.
PLC - > Cartridge
Cartridge - > PLC
If the password is configured, you are prompted to enter the password.
5.
Enter the password with the
Password:
***A
The confirmation screen is displayed.
Select Yes with the
6.
Do you want to clear
program in PLC?
No
Yes
7. The screen below is displayed while the user program is downloaded. When the download is finished, the screen in step 4 is
displayed.
Notes:
In either of the situations below, the password must be entered.
•
The user program on the SmartAXIS has been password protected for program uploads.
•
The user program on the memory cartridge has been password protected for program downloads.
•
If an invalid password is entered in step 5, the screen below is displayed.
•
Password is incorrect.
Press the (ESC) button or the
(ESC) +
(up) and
(up) and
(up) and
(up), (down),
Entering the password is required for the following cases:
- The user program in the SmartAXIS is password-protected against the user program download.
- The user program in the memory cartridge is password-protected against the user program upload.
(down) button and press the
(OK) button to return to step 4, and then enter the correct password in step 5.
S AXIS P
MART RO
(OK) buttons.
(down) buttons and press the
(down) buttons and press the
(down) buttons and press the
(left), and (right) buttons and press the
(OK) button.
/L U ' M FT9Y-B1378
ITE SER S ANUAL
6: HMI F
(OK) button.
(OK) button.
(OK) button.
(OK) button.
UNCTION
6-23