IDEC FT1A Series User Manual page 353

Troubleshooting Diagram 5
Output does not operate normally.
Is the power/run status LED on?
Is the LCD backlight on?
SmartAXIS Lite: Check the output with WindLDR.
SmartAXIS Pro: Check the output with WindLDR
or the device monitor.
addresses correct?
Does the monitored output
Is the SmartAXIS output
connection correct?
Call IDEC for assistance.
SmartAXIS Lite:
NO
SmartAXIS Pro:
YES
NO
Are output device
YES
NO
turn on and off?
YES
NO
YES
S AXIS P
MART
Note: The Start button is found in the
WindLDR menu bar.
Click the Start button in WindLDR on a
computer connected to the SmartAXIS.
Correct the program.
The output circuit in the SmartAXIS is
damaged.
Replace the SmartAXIS.
Correctly connect the output.
/L U ' M FT9Y-B1378
RO ITE SER S ANUAL
14: T
ROUBLESHOOTING
END
14-13