Ethernet Port - IDEC FT1A Series User Manual

Ethernet Port

Functions
SmartAXIS with Ethernet port can communicate with other network devices that support Ethernet communications, such as
maintenance communication, Modbus TCP (client and server) communication, and user-defined communication (ETXD and ERXD
commands).
Applicable Models
An Ethernet port is available on the 24-, 40-, and 48-I/O types.
12-I/O type
No
Specifications
Item
Transmission Speed
Electrical Characteristics
Recommended Cable
Connector
AutoMDI/MDI-X Function
Installation Procedure
Remove the protective seal covering the Ethernet port and insert the connector of an Ethernet cable securely.
(1) Remove protective seal
•
Caution
•
24-I/O type
Yes
10BASE-T/100BASE-TX
IEEE 802.3-compliant
CAT.5 STP (Category 5 shielded twisted-pair cable)
RJ45
Yes (when only two SmartAXIS are connected, they can be directly connected with a straight cable)
(2) Insert the connector
Turn off the power to the SmartAXIS before connecting an Ethernet cable to the Ethernet port.
If an Ethernet cable is connected while the SmartAXIS is powered, electrical shock to the operator or damage to the
SmartAXIS may be caused.
S AXIS P
MART RO
40-I/O type
Yes
Specifications
/L U ' M FT9Y-B1378
ITE SER S ANUAL
2: P S
RODUCT PECIFICATIONS
48-I/O type
Yes
2-27