IDEC FT1A Series User Manual page 147

■Configuration in the Function Area Settings
From the WindLDR menu bar, select Configuration > LCD Settings.
1.
The Function Area Settings dialog box is displayed.
Select the Enable ladder program monitoring on FT1A check box.
2.
Click the OK button.
3.
This concludes configuring the settings.
Note: The setting you select in the Ladder Program Monitoring on FT1A dialog box at the start up of WindLDR can be changed in the Function Area
Settings dialog box later.
S AXIS P /L U '
MART RO ITE SER S
M FT9Y-B1378
ANUAL
5: S F
PECIAL UNCTIONS
5-59