IDEC FT1A Series User Manual page 243

Once again in the Data Type Selection dialog box, click Constant (Hexadecimal) and click OK. Next, in the Constant
6.
(Hexadecimal) dialog box, type 03 to program the end delimiter ETX (03h). When finished, click OK.
In the Transmit instruction dialog box, type M10 in the destination D1 box and type D100 in the destination D2 box. When
7.
finished, click OK.
Programming of the TXD2 instruction is complete and the transmit data is specified as follows:
STX "1" "2"
(02h) (31h) (32h)
Constant D10
(hex)
BCC calculation range
"3" "4" "5" "6" "7"
(33h) (34h) (35h) (36h) (37h)
D11
S AXIS P
MART RO
10: U
BCC BCC
"8" ETX
(H) (L)
(38h) (03h)
(41h) (36h)
BCC Constant
(hex)
/L U ' M FT9Y-B1378
ITE SER S ANUAL
C
SER OMMUNICATION
I
NSTRUCTIONS
10-7