IDEC FT1A Series User Manual page 299

Remote I/O Slave HMI Function
This section describes the menu screen when the SmartAXIS Pro is configured as a remote I/O slave.
For the button operations on the menu screen, see Chapter 6 "HMI Function".
Standard Screen
This screen displays content according to the communication state with the remote I/O master.
Connected
Remote I/O Slave
Connected
System menu
The menu items displayed when the SmartAXIS is configured as a remote I/O slave.
Configurations
•
*1
Device Monitor
•
Status Monitor
•
Error Status
•
*1 The remote I/O slave device monitor is read-only. The device values cannot be modified.
Monitoring the Remote I/O Slave Status
You can check the system software version and the communication cycle of the remote I/O slave.
On the standard screen, press the
1.
Connected
Remote I/O Slave
Connected
The system menu is displayed.
2. Select Status Monitor with the
Configurations
Device Monitor
Status Monitor
Error Status
The system version is displayed. Press the
3.
Connected
System Version:
2.00
Communication state:
Connected
The communication cycle is displayed.
Connected
Communication cycle
Current:
Maximum:
Minimum:
Current:
Maximum:
Minimum:
Disconnected
Remote I/O Slave
Disconnected
Configurations
Device Monitor
Status Monitor
Error Status
(ESC) +
Disconnected
Remote I/O Slave
Disconnected
(up) and
(down) button.
Disconnected
System Version:
2.00
Communication state:
Disconnected
Disconnected
Communication cycle
Current:
Maximum:
Minimum:
The current communication cycle with the remote I/O master.
The maximum communication cycle from when the connection with the remote I/O master was
established until the present.
The minimum communication cycle from when the connection with the remote I/O master was
established until the present.
S AXIS P
MART RO
(OK) buttons.
(down) buttons and press the
/L U ' M FT9Y-B1378
ITE SER S ANUAL
12: R
(OK) button.
I/O
EMOTE
12-9