IDEC FT1A Series User Manual page 306

13: S
CRIPTS
Device List
This section shows the devices that can be used in Script Editor and the device notation.
This section describes available devices and its notation that can be used in the Script Editor dialog box.
Note: The device ranges differ depending on each SmartAXIS. Specify the devices within the device range of the selected SmartAXIS. For device
ranges, see "Device Addresses" on page 7-1.
I (Inputs)
Q (Outputs)
R (Shift registers)
M (Internal relays)
Bit device
C (Counter contacts)
T (Timer contacts)
D (Data register bits)
D (Data registers)
TC (Timer current values)
Word device
TP (Timer preset values)
CC (Counter current values)
CP (Counter preset values)
Calculations in which both bit and word devices are used are not allowed.
Bit devices are always processed as bits, and values of those devices are 0 (OFF) or 1 (ON).
Applicable SmartAXIS
FT1A-12
X
13-2
Device
FT1A-24
X
S AXIS P /L
MART RO
I000 to I155
Q000 to Q141
R000 to R127
M0000 to M1277,
M8000 to M8177
C000 to C199
T000 to T199
D0000.0 ... D0000.15 to D1999.0 ... D1999.15,
D8000.0 ... D8000.15 to D8199.0 ... D8199.15
D0000 to D1999,
D8000 to D8199
TC000 to TC199
TP000 to TP199
CC000 to CC199
CP000 to CP199
FT1A-40
X
U ' M FT9Y-B1378
ITE SER S ANUAL
Notation in Script Editor
FT1A-48
X