IDEC FT1A Series User Manual page 178

6: HMI F
UNCTION
Modify the value with the
4.
For example, change the value to 700 ms.
Scroll Speed:
700 ms
Scroll Unit:
1-character
Selectable scroll speeds
•
The scroll speeds that can be selected are as follows.
500/600/700/800/900/1000 ms
Configuring the Scroll Unit
When the SmartAXIS is stopped, you can configure the scroll unit for messages displayed with the message (MSG) instruction/FB.
This cannot be configured while the SmartAXIS is running.
In step 3 of Modifying the Scroll Speed, select Scroll Unit and press the
1.
Scroll Speed:
500 ms
Scroll Unit:
1-character
Modify the scroll unit with the
2.
Scroll Speed:
500 ms
Scroll Unit:
1-dot
Selectable scroll units
•
The scroll units that can be selected are as follows.
1 character/1 pixel
Configuring the Blinking Speed
When the SmartAXIS is stopped, you can configure the blinking speed for messages displayed with the message (MSG)
instruction/FB. This cannot be configured while the SmartAXIS is running.
1. In step 2 of Configuring the Scroll Speed, select Blink Settings and press the
Scroll Settings
Blink Settings
Select Blinking Speed with the
2.
Blinking Speed:
500 ms
Modify the value with the
3.
Blinking Speed:
700 ms
Selectable blinking speeds
•
The blinking speeds that can be selected are as follows.
500/600/700/800/900/1000 ms
6-14
(up) and (down) buttons and press the
(up) and (down) buttons and press the
(up) and (down) buttons and press the
(up) and (down) buttons and press the
S AXIS P /L
MART RO ITE
(OK) button.
(OK) button.
(OK) button. For example, change the value to 700 ms.
U ' M FT9Y-B1378
SER S ANUAL
(OK) button.
(OK) button.
(OK) button.