IDEC FT1A Series User Manual page 28

2: P S
RODUCT PECIFICATIONS
LCD Specifications (SmartAXIS Pro only)
Type
Resolution
Number of Characters
Display Content
Contrast Adjustment
Backlight
Input Specifications (AC Power Type)
Type Number
Input Points
Rated Input Voltage
Input Voltage Range
Terminal Arrangement
Input External Power
Supply
Voltage Fluctuation
Range/Capacity (Note 1)
Digital Input
Input Type
Input Points
(Terminal No./
Common Line Name)
Rated Input Current
Input Impedance
Turn ON Time
Turn OFF Time
Isolation
Input Type
Shared Digital/Analog
Inputs
Pro
Status
Display
Lite
External Load for I/O
Interconnection
Signal Determination
Method
Cable Length
Effect of Improper
Input Connection
Note 1: When an overload state occurs such as a short circuit in the input external power supply, the power supplied to the internal circuit of the
SmartAXIS is stopped. When the overload state is cleared, the output automatically recovers.
2-8
STN monochrome LCD
64 x 192 pixels
24 digits x 8 lines (8 x 8 pixel font)
12 digits x 8 lines (16 x 8 pixel font)
12 digits x 4 lines (16 x 16 pixel font)
System menus, messages, operation status monitor
Not possible
Yes (backlight can be turned on and off)
H12RC
B12RC
8 16
24V DC
0 to 28.8V DC
See "Terminal Arrangement" on page 2-16.
DC20.4 to 26.4V
—
250mA
Contacts Sink/Source
16 points in 1 common
8 points in 1 common line
line
(I0 to I7/COM)
(I0 to I7, I10 to I17/COM)
5.3mA
4.3kΩ
40 μs + filter value
150 μs + filter value
Between input terminals: Not isolated
Internal circuit: Photocoupler isolated
Type 1 (IEC61131-2)
No
LCD display
—
Not needed
Static
100m in compliance with electromagnetic immunity
No damage. If any input exceeding the rated value is applied, permanent damage may be caused.
S AXIS P
MART RO
Description/Specifications
FT1A-
H24RC
B24RC
24
DC20.4 to 26.4V
300mA
24 points in 1 common
line
(I0 to I7, I10 to I17, I20
to I27/COM)
/L U ' M FT9Y-B1378
ITE SER S ANUAL
H48KC
H40RC H48SC
B40RC B48KC
B48SC
30
DC20.4 to 26.4V
300mA
30 points in 2 common
lines
(I0 to I7, I10 to I17, I20
to I25/COMA, I26, I27,
I30 to I35/COMB)