IDEC FT1A Series User Manual page 183

Monitoring the SmartAXIS Status
You can check the SmartAXIS system software version, operating status, scan time, and protection status.
1. On the standard screen, press the
When the SmartAXIS is running
Running
2012/OCT/10/WED
13:30:40
The system menu is displayed.
Select Status Monitor with the
2.
When the SmartAXIS is running
External Memory
Device Monitor
Program Monitor
Status Monitor
The system version is displayed. Press the
3.
When the SmartAXIS is running
System Version:
1.00
Run/Stop Status:
Running
The scan time is displayed. Press the
4.
Scan Time:
Current 2 ms
Maximum 4 ms
Minimum 2 ms
The upload protection status is displayed. Press the
5.
Protection Status:
Read Program:
Prohibited
The download protection status is displayed.
6.
Protection Status:
Write Program:
Password
(ESC) + (OK) buttons.
When the SmartAXIS is stopped
Stopped
2012/OCT/10/WED
13:30:40
(up) and (down) buttons and press the
When the SmartAXIS is stopped
Configurations
Device Monitor
Program Monitor
Status Monitor
(down) button.
When the SmartAXIS is stopped
System Version:
1.00
Run/Stop Status:
Stopped
(down) button.
(down) button.
S AXIS P /L U
MART RO ITE
' M FT9Y-B1378
SER S ANUAL
6: HMI F
(OK) button.
UNCTION
6-19