Opening The Sunny Island - SMA Sunny Island 2012 Technical Description

SMA Solar Technology AG

6.1 Opening the Sunny Island

NOTICE!
The components in the Sunny Island (e.g., communications interface) can be
damaged by an electrostatic discharge!
• When working on the Sunny Island and when handling the components observe all
ESD safety regulations.
• Eliminate static charge by touching the grounded metal casing.
• Only then should you begin any work.
1. Loosen the six non-removable allen screws on the
lower cover (B).
2. Remove the cover carefully.
3. Unplug the control area cable from the inner side
of the enclosure cover (in the new devices the
cable is not in place).
4. Keep the cover in a safe place.
Technical Description
B
D
SI2012_2224-TEN082311
Opening and Closing
37