Control Elements; Sunny Island; Control Panel On The Enclosure; Control Panel Buttons - SMA Sunny Island 2012 Technical Description

Control Elements

8 Control Elements
Before commissioning the island grid system, familiarize yourself with the operation of the device.
The Sunny Island is operated with the control panel on the enclosure only under the standard setup
(for default values see chapter 17.2 "Adjustable System Parameters" (Page 166)).
To change the Sunny Island's parameter setup you need the Sunny Remote Control 1 (SRC-1)
external display.

8.1 Sunny Island

8.1.1 Control Panel on the Enclosure

The following diagram describes the elements of the control panel:
Start / Stop button

8.1.2 Control Panel Buttons

The Sunny Island's control panel has three buttons.
• Start / Stop starts and stops the inverter operation of the Sunny Island (see also chapter 10.1
"Switching On and Off" (Page 83)).
• DC start turns ont the Sunny Island (standby).
• DC stop turns off the Sunny Island

8.1.3 Meaning of the Light-Emitting Diodes (LEDs)

The three LEDs show, from top to bottom, state messages for
• Sunny Island (inverter LED)
• Grid / Generator (grid LED)
• Battery (battery LED)
70 SI2012_2224-TEN082311
DC start
DC stop
button
button
Inverter LED
Grid LED
SMA Solar Technology AG
Battery LED
Technical Description