Observe Minimum Clearances - SMA Sunny Island 2012 Technical Description

SMA Solar Technology AG

5.2.3 Observe minimum clearances

The following minimum clearances to walls, other devices or objects must be observed to guarantee
sufficient heat dissipation.
All external cables are connected through the
underside of the housing. This requires a minimum
clearance of at least 50 cm.
Direction
sides
above
below
in front
Sufficient Ventilation
When installing the in smaller rooms, make sure that adequate ventilation is available.
During operation the device produces heat which must be dissipated.
Technical Description
Minimum clearance
10 cm
30 cm
50 cm
5 cm
SI2012_2224-TEN082311
Installation
25