Rotating Pushbutton; Mmc/Sd Card - SMA Sunny Island 2012 Technical Description

Control Elements

8.2.3 Rotating Pushbutton

The Sunny Remote Control 1 is controlled via a rotating pushbutton. This pushbutton allows simple
navigation of the Sunny Island menus (see chapter 10.2 "Navigation Area" (Page 89)).
The rotating pushbutton can be pushed or turned.
• Turn:
- Moves up and down the menu
- Entering values
• Push:
- Open/close menu
- Select/cancel function
- Select value
- Confirm entry
- Answers yes/no
- Starts the device (hold down the button while on standby)
- Stops the device (hold down the button during operation)
Operation of the Sunny Island with the Sunny Remote Control 1 using the rotating pushbutton is
described in detail in chapter 10 "Operating the Sunny Island" (Page 83).
In the remainder of the manual, the "rotating pushbutton" will only be referred to as "button".

8.2.4 MMC/SD card

The Sunny Remote Control 1 provides an MMC/SD card for firmware updates and as a service
interface. For details, refer to section 10.4 "Saving Data onto a MMC/SD Card" (Page 107).
74 SI2012_2224-TEN082311
SMA Solar Technology AG
Technical Description