SMA Sunny Island 2012 Technical Description page 187

SMA Solar Technology AG
Display
number
E621 relay 2 on slave 2 open
E622 relay 2 on slave 2 closed
E625 digital input OFF (low)
E626 digital input ON (high)
E627 Digital Input Slave 1 to OFF (low) (not active)
E628 Digital Input Slave 1 to ON (High) (not active)
E629 Digital Input Slave 2 to OFF (low) (not active)
E630 Digital Input Slave 2 to ON (High) (not active)
Category SYS
E705 device start
E706 Set Date Time (Recording is done with "old" time)
E707 new system configured in the QCG
E708 Part 1 of the firmware updated (entry of the "old" version)
E709 Part 2 of the firmware updated (entry of the "old" version)
E711 MMC/SD card inserted
E712 Sunny Remote Control 1: parameter update
E715 Sunny Remote Control 1 activated
E851 First SIC40 has been detected
E852 Second SIC40 has been detected
E853 Third SIC40 has been detected
E854 Fourth SIC40 has been detected
Technical Description
Description
SI2012_2224-TEN082311
Troubleshooting/Problem Solving
187