SMA Sunny Island 2012 Technical Description page 109

SMA Solar Technology AG
File name
failhism.log (failhisN.log for SlaveN)
si030607.evt
si030607.log
sipar1.lst
sipar2.lst
update.bin
Information
The "BOOTEX.LOG" file is not necessarily on the card. It is created depending on the
operating system used (e.g. WindowsXP or Windows2000).
The Sunny Island's firmware expects device-specific data in the root directory of the MMC/SD card.
This data consists of a new firmware, parameters and measurement data.
The Sunny Island uses the MMC/SD card in the Sunny Control 1 to store and load device
parameters.
In addition, the Sunny Island supports the acquisition of measurement data on the MMC/SD card.
It saves these data in a special file. Among other things, the file contains a header, time stamp, date
and data type. There are two different types of log data:
• Measurement data (saved cyclically)
• Events and failures (only saved when they occur)
The Sunny Island supports measurement data storage of data from the fields:
• Battery
• Inverter
• System
• External source and
• Loads
Technical Description
Meaning
Failure history of the device, saved by means of
parameter "550.03 CardFunc", option
StoFailHis
Event/failure history for the day
(format: ddmmyy)
Data recording for the day
(format: ddmmyy)
Parameter list for the device, created by means
of parameter "550.01 ParaSto", option Set1
parameter list for the device, created by means
of parameter "550.01 ParaSto", option Set2
Software for the device
SI2012_2224-TEN082311
Operating the Sunny Island
109